8-12
Maintenance
c
Caution:
Leave the ink cartridges installed when you transport the
printer. Removing the cartridges during transport can
damage the printer.
2. Unplug the power cord from the electrical outlet, then
disconnect the interface cable from the printer.
3. Remove the paper from the sheet feeder and removethepaper
support.
4. Open the printer cover again. Secure the ink cartridge holder
to the printer with tape as shown below, then close the printer
cover.
5. Push in the output extension tray, and then raise the output
tray.
6. Attach the protective materials to both sides of the printer.
7. Repack the printer and power cord in the original box.
8. Keep the printer level during transport.
To Next Page
Loading...
