EPSON Stylus Color 980 Revision A
Disassembly and Assembly Disassembly Procedures 117
7. Release the peg fixing the hopper assembly to the ASF frame by the
top left. Then separate the hopper assembly and the ASF frame.
Figure 4-27.
Separating the Hopper Assembly from the ASF Frame
8. Remove the right and left paper loading assemblies from the hopper
assembly. (The compression spring is remove together.)
9. Release one hook securing the LD roller cover in the paper loading
assembly, and remove the LD roller cover.
Figure 4-28. LD Roller Cover Removal
10. Release four hooks securing the LD roller assembly to the frame in
the paper loading assembly, and remove the LD roller assembly.
Figure 4-29. LD Roller Assembly Removal
H opper A ssem bly
ASF Fram e
Paper Loading
Assembly
LD Roller Cover
LD Roller Cover
CAUTION
Never touch the rubber part of the LD roller assembly
with your bare hands.
Paper Loading A ssem bly
H ooks Fixing the
LD R oller A ssem bly
To Next Page
Loading...
