Stylus Pro 4880 Field Repair Guide 1/17/08
Input Roller Assembly, Re-assembly Printer Component, Software Item, LCD Display, Printer Button Page 71.
5. Study the polarity, and order of the parts below.
6. Install the Roller Assembly components into the Base Assembly, following the directions above.
Paddles positioned, so that the
arrow on the side faces up
The Right and Left Rollers are different. Pay
attention to the position of the Slots.
Home Position Window faces the oppo-
site direction from the flat side of the
Roller.
The Disks have depressions, that fit
the Springs.
Paddle on the inside
of the Frame.
Paddle on the out-
side of the Frame.
Cover marked with R
Cover marked with L
To Next Page
Loading...
