Stylus Pro 4880 Field Repair Guide 1/17/08
Input Roller Assembly, Re-assembly Printer Component, Software Item, LCD Display, Printer Button Page 72.
7. Rotate the Input Rollers so that the flat side is down to allow the Roller to interlock with the Roller
Frame.
8. Re-attach the Roller Covers, 3 E-rings, and Gear.
Flat side down
This part of both Rollers must fit through the Roller Side Frame.
1 E-Ring between the
Roller Assembly and the
Frame.
Gear
2 Roller Covers E-Ring
1 E-Ring fastening
this Gear.
To Next Page
Loading...
