2-74 Assembly and Disassembly Rev.D
Confidential
49. Perform phase adjustment. (See page 3-2, "Phase Adjusting." )
Note:
Perform the following step only if your printer has a MICR unit.
50. Attach the shielded paper feed motor to the main frame with two screws. Attach so that the
motor cable is facing the direction shown in the illustration.
Figure 2-74
726 Screw (C.B.S-tite F, 3X6)
726 Screw (C.B.S-tite F, 3X6)
To Next Page
Loading...
