Rev.D Assembly and Disassembly 2-101
TM-U675/U675P (with autocutter) Service Manual
Confidential
14. Fix the control panel circuit board assembly to the mechanism assembly (M-U675) with one
screw.
15. Connect the control panel cable to the control panel circuit board assembly. Route the
wiring so that the control panel cable is positioned under the L-shaped part shown in the
illustration.
Figure 2-102
204
Control panel circuit
board assembly
102 Screw (C.B.S-tite F, 3X4)
207
Control panel cable
L-shaped part
To Next Page
Loading...
