2-102 Assembly and Disassembly Rev.D
Confidential
16. Attach the rubber feet to the lower case.
17. Attach the mechanism assembly (M-U675) to the lower case with four screws. Align the
mechanism assembly (M-U675) with the lower case nibs.
CAUTION:
Be careful not to allow the power switch cable assembly to become pinched.
Figure 2-103
109
Screw (C.B.B-tite, 4X25)
112
Plain washer (4.2X1X12)
108 Screw (C.B.B-tite, 4X12)
124
Rubber foot
124
Rubber foot
124
Rubber foot
108 Screw (C.B.B-tite, 4X12)
127
Lower case
To Next Page
Loading...
