Rev.D Assembly and Disassembly 2-13
TM-U675/U675P (with autocutter) Service Manual
Confidential
12. Insert to attach the MICR roller shaft from the opposite direction of the MICR lever fixing
plate. Attach with one E-ring.
13. Attach the MICR lever spring on the hooks.
14. Check that opening and closing the MICR head assembly has a clicking feel to it.
15. Insert the MICR shield cover into the three slits in the MICR frame.
16. Hook the MICR connector assembly lead wire to the hook on the MICR frame.
Figure 2-12
785 MICR shield cover (type A)
790
MICR lever spring
777 MICR roller shaft
778 E-ring (1.2)
To Next Page
Loading...
