2-12 Assembly and Disassembly Rev.D
Confidential
9. Fit the MICR solenoid into the MICR case.
10. Align and fit the MICR solenoid nib into the MICR frame assembly.
11. Position and attach the MICR lever fixing plate to the MICR lever nib. (Use two screws to
attach.)
Note:
Tighten the screws while holding the MICR solenoid. Check that the MICR lever will fall under its
own weight.
Figure 2-11
783 MICR case
789 MICR solenoid
784 MICR lever fixing plate
794
Screw (C.P.(S), 2.6X8)
To Next Page
Loading...
