2-20 Assembly and Disassembly Rev.D
Confidential
14. Insert the hole in the carriage motor onto the carriage frame sub assembly nib. Temporarily
fasten the screw on the lead wire side.
15. Loosen the screw you temporarily tightened in the previous step (less than one turn).
16. Hook the belt tension spring on the carriage motor and carriage frame sub assembly.
Figure 2-19
775
Screw
(C.P.S-tite(P4), 3x6)
733
Carriage motor
Nib
Carriage frame sub assembly
630 Belt tension spring
To Next Page
Loading...
