Epson TM-U675 - Page 71

Rev.D Assembly and Disassembly 2-37
TM-U675/U675P (with autocutter) Service Manual
Confidential
25. Attach the platen lever assembly, platen ground plate B, and the platen lever spring to the
paper feed frame assembly. Insert the platen lever spring onto the cross-shaped protrusion
on the paper feed frame, and insert the other end onto the protrusion on the platen lever
assembly.
26. Insert the left and right platen lever shafts into the holes in the platen lever assembly and
attach with two E-rings.
Figure 2-37
626
Left platen lever shaft
721 E-ring (3)
721 E-ring (3)
625
Platen lever spring
675
Platen ground plate
(type B)
727
J/S change solenoid