2-36 Assembly and Disassembly Rev.D
Confidential
19. Insert the nylon lock nut (M3) onto the platen lever assembly on the side where the platen
ground plate (type A) is to be attached. The rounded side of the nylon lock nut (M3) should
be facing the direction shown in the illustration.
20. Insert the platen ground plate (type A) into the platen lever assembly.
21. Insert the two platen springs into the platen lever assembly.
22. Insert another nylon lock nut (M3).
23. Attach the platen assembly to the platen lever assembly. Secure the two platen adjustment
screws.
24. Attach the slip paper guide to the platen lever assembly. Hang the slip paper guide on the
hooks in three places on the platen lever assembly and fit the 2 nibs.
Figure 2-36
685
Platen adjustment screw
711 Platen assembly
685 Platen
adjustment screw
718
Nylon lock nut
604
Platen spring
604
Platen spring
670
Slip paper guide
674
Platen ground
plate (type A)
718 Nylon lock nut
To Next Page
Loading...
