Epson WorkForce 600 - Removing the Printer Mechanism;Card Slot Cover

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW Revision A
DISASSEMBLY/ASSEMBLY Disassembling the Printer Mechanism 114
Confidential
4.5.4 Removing the Printer Mechanism/Card Slot Cover
 Parts/Components need to be removed in advance
Scanner Unit/ADF Unit/Upper Housing /Hinge/Middle Cover
 Removal procedure
1. Remove the screw (x1) securing the Card Slot Cover.
2. Release the hooks (x2) securing the Card Slot Cover, and remove the Card
Slot Cover.
Figure 4-54. Removing the Card Slot Cover
3. Release the hook that secures the Rear Cover with tweezers, and remove the
Rear Cover.
Figure 4-55. Removing the Rear Cover
C.B.P. 3x10, F/Zn-3C (6±1kgfcm)
Top
Hook
Card Slot Cover
C A U T I O N
When lifting the Printer Mechanism, be sure to hold the positions
specified in the figure below to prevent the Main Frame from being
deformed.
Figure 4-56. Printer Mechanism Handling Precaution
Hook
Rear Cover
Handling Precaution