Epson WorkForce 600 - Removing the Housing; Paper Support Assy;Asf Cover; Stacker Assy

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW Revision A
DISASSEMBLY/ASSEMBLY Removing the Housing 94
Confidential
4.3 Removing the Housing
4.3.1 Paper Support Assy/ASF Cover
 Parts/Components need to be removed in advance: None
 Removal procedure
1. Pull out the Paper Support Assy.
2. Release the dowels (x2) that secure the Paper Support Assy and remove
the Paper Support Assy from the Upper Housing.
3. Release the dowels (x2) and remove the ASF Cover.
Figure 4-1. Removing the Paper Support Assy/ASF Cover
4.3.2 Stacker Assy
 Parts/Components need to be removed in advance: None
 Removal procedure
1. Pull out the Stacker Assy.
2. Release the hooks (x2) from the grooves (x2) at the bottom of the Lower
Housing, and remove the Stacker Assy.
Figure 4-2. Removing the Stacker Assy
Dowels
Paper Support Assy
ASF Cover
Bottom
Hooks and grooves
Stacker Assy