Epson WorkForce 600 - Disassembly Procedures

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW Revision A
DISASSEMBLY/ASSEMBLY Disassembly Procedures 92
Confidential
4.2 Disassembly Procedures
For disassembling each unit, refer to the pages in the following flowchart.
Flowchart 4-1. Disassembling Flowchart (1)
“ 4.5.1 Printhead ” (p109)
C H E C K
P O I N T
 You need to remove the parts/units shown in dashed line box if they exist on
the way to the target part/unit.
 For the disassembling procedures of the Scanner Unit and the ADF Unit, see
Flowchart 4-2 Disassembling Flowchart (2) (p93) .
 The ADF Unit can be removed individually before the procedure of removing
the Scanner Unit/ADF Unit. See
4.3.3 Scanner Unit/ADF Unit (p95) .
“ 4.3.1 Paper Support Assy/ASF Cover ”
(p94)
“ 4.5.2 CR Scale ” (p112)
“ 4.5.15 Upper Paper Guide ” (p127)
“ 4.5.6 Front Frame/Right Frame ” (p116)
“ 4.5.3 Hopper ” (p113)
“ 4.5.9 PF Encoder Sensor ” (p120)
“ 4.5.2 CR Scale ” (p112)
“ 4.3.2 Stacker Assy ” (p94)
“ 4.5.16 ASF Unit ” (p128)
“ 4.5.18 Front Paper Guide ” (p132)
“ 4.5.9 PF Encoder Sensor ” (p120)
“ 4.5.17 Ink System Unit ” (p129)
“ 4.5.12 CR Motor ” (p122)
“ 4.5.5 Left Frame ” (p115)
“ 4.5.7 Star Wheel Holder Assy ” (p118)
“ 4.5.8 EJ Roller ” (p119)
“ 4.5.11 PF Motor Assy ” (p121)
“ 4.5.7 Star Wheel Holder Assy ” (p118)
“ 4.5.10 PF Scale ” (p121)“ 4.5.8 EJ Roller ” (p119)
“ 4.5.14 CR Unit ” (p126)
“ 4.5.10 PF Scale ” (p121)
“ 4.3.3 Scanner Unit/ADF Unit ” (p95)
“ 4.5.3 Hopper ” (p113)
“ 4.5.7 Star Wheel Holder Assy ” (p118)
“ 4.5.1 Printhead ” (p109)
“ 4.5.4 Removing the Printer Mechanism/Card
Slot Cover ” (p114)
“ 4.3.4 Upper Housing /Hinge/Middle
Cover ” (p97)
“ 4.3.5 Panel Unit ” (p100)
“ 4.4.1 Main Board Unit ” (p102)
“ 4.4.2 Wireless LAN Module ” (p105)
“ 4.5.13 Main Frame Assy ” (p124)
“ 4.5.19 PF Roller ” (p133)
“ 4.5.20 Waste Ink Pads ” (p134)
“ 4.4.3 Disassembling the Panel Unit ” (p105)
“ 4.4.4 Power Supply Unit ” (p108)
Start