Epson WorkForce 600 - ADF Document Support Assy; ADF Frame Unit

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW Revision A
DISASSEMBLY/ASSEMBLY Disassembling the ADF Unit 145
Confidential
4.7.7 ADF Document Support Assy
 Parts/Components need to be removed in advance
Scanner Unit/ADF Unit/ADF Cover Assy/ADF Right Cover/ADF Rear Cover/
ADF Cover Stacker/ADF Document Support Cover/ADF Front Cover
 Removal procedure
1. Release the hooks (x2) securing the ADF Document Support Assy.
2. Release the dowels (x2) securing the ADF Document Support Assy and
remove the ADF Document Support Assy from the ADF Base Assy.
Figure 4-140. Removing the ADF Document Support Assy
4.7.8 ADF Frame Unit
 Parts/Components need to be removed in advance
Scanner Unit/ADF Unit/ADF Cover Assy/ADF Right Cover/ADF Rear Cover/
ADF Cover Stacker/ADF Document Support Cover/ADF Front Cover/ADF
Document Support Assy
 Removal procedure
1. Release the ADF Motor cable and grounding wire from the rib of the ADF
Frame Unit.
2. Remove the ADF Cable Cover from the hole of the ADF Base Assy, and pull
out the ADF Sensor cable, ADF Motor cable and grounding wire through the
hole of the ADF Base Assy.
Figure 4-141. Removing the ADF Frame Unit (1)
ADF Document Support Assy
Dowel
Hook
ADF Base Assy
ADF Motor Cable
Rib
ADF Motor Unit
Route the ADF Sensor cable
through the groove at the bottom
of the ADF base Assy.
Bottom
ADF Frame Unit
ADF Sensor cable
Grounding wire
ADF Base Assy