Epson WorkForce 600 - Upper Paper Guide

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW Revision A
DISASSEMBLY/ASSEMBLY Disassembling the Printer Mechanism 127
Confidential
3. Release the Timing Belt from the groove of the CR Unit.
Figure 4-87. Removing the CR Unit (2)
4.5.15 Upper Paper Guide
 Parts/Components need to be removed in advance
Scanner Unit/ADF Unit/Upper Housing /Hinge/Middle Cover/Printer Mechanism/
Card Slot Cover/Main Board Unit/Left Frame/Front Frame/Right Frame/CR
Motor/CR Scale/Hopper/Main Frame Assy
 Removal procedure
1. Release the hooks (x6), and remove the Upper Paper Guide.
Figure 4-89. Removing the Upper Paper Guide
 Put the part of the Timing Belt toothed on its both sides into
the groove of the CR Unit.
Figure 4-88. Installing the Timing Belt
A D J U S T M E N T
R E Q U I R E D
 After replacing the CR Unit, be sure to perform the required
lubrication.
• Chapter 6 “ MAINTENANCE” (p.163)
Timing Belt
Groove
CR Unit
When installing the Upper Paper Guide, insert the legs (x2) of the
antistatic cloth into the holes (x2) of Upper Paper Guide as shown
in the figure below.
Figure 4-90. Installing the Upper Paper Guide
Upper Paper Guide
Hook
Antistatic Cloth
Upper Paper Guide
Legs