Epson WorkForce 600 - Left Frame

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW Revision A
DISASSEMBLY/ASSEMBLY Disassembling the Printer Mechanism 115
Confidential
4. Remove the screws (x5) that secure the Printer Mechanism, and remove the
Printer Mechanism by lifting it.
Figure 4-57. Removing the Printer Mechanism
4.5.5 Left Frame
 Parts/Components need to be removed in advance
Scanner Unit/ADF Unit/Upper Housing /Hinge/Middle Cover/Printer Mechanism/
Card Slot Cover/Main Board Unit
 Removal procedure
1. Peel off the double sided tape that secures the PF Encoder FFC to the Left
Frame.
2. Remove the screws (x2), and remove the grounding plate.
3. Remove the screws (x3) that secure the Left Frame, and remove the Left
Frame.
Figure 4-58. Removing the Left Frame
5
C.B.P. 3x10, F/Zn-3C (6±1kgfcm)
1
2
3
4
Printer Mechanism
Positioning hole and dowel
3
2
1
Grounding Plate
Top
C.B.P. 3x8, F/Zn-3C (6±1kgfcm)
C.B.S. 3x6, F/Zn-3C (6±1kgfcm)
Left Frame
PF Encoder FFC
Double-sided
tape
C.B.P. 3x10, F/Zn-3C (6±1kgfcm)