Epson WorkForce 600 - Page 92

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW Revision A
DISASSEMBLY/ASSEMBLY Disassembly Procedures 93
Confidential
Flowchart 4-2. Disassembling Flowchart (2)
“ 4.6.1 Separating the Scanner Unit and the ADF
Unit ” (p135)
“ 4.6.2 Upper Scanner Housing ” (p136)
“ 4.6.3 Scanner Carriage Unit ” (p137)
“ 4.6.4 Scanner Motor Unit ” (p138)
 Disassembling the Scanner Unit  Disassembling the ADF Unit
C H E C K
P O I N T
 You need to remove the parts/units shown in dashed line box if they exist on
the way to the target part/unit.
 For the disassembling procedures of the Scanner Unit and the ADF Unit, see
Flowchart 4-1 Disassembling Flowchart (1) (p92) .
 The ADF Unit can be removed individually before the procedure of
removing the Scanner Unit/ADF Unit. See
4.3.3 Scanner Unit/ADF Unit
(p95)
.
Start
“ 4.6.1 Separating the Scanner Unit and the ADF
Unit ” (p135)
“ 4.7.2 ADF Cover Assy/ADF Left Cover ” (p140)
“ 4.7.4 ADF Right Cover/ADF Rear Cover ” (p141)
“ 4.7.7 ADF Document Support Assy ” (p145)
“ 4.7.5 ADF Cover Stacker/ADF Document
Support Cover ” (p143)
“ 4.7.6 ADF Front Cover ” (p144)
“ 4.7.10 ADF PF Roller ” (p148)
“ 4.7.3 ADF LD Frame Assy ” (p141)
“ 4.7.8 ADF Frame Unit ” (p145)
“ 4.7.1 ADF Hinge ” (p139)
“ 4.7.9 ADF Motor Unit ” (p146)
Start