Epson WorkForce 600 - Page 141

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW Revision A
DISASSEMBLY/ASSEMBLY Disassembling the ADF Unit 142
Confidential
2. Remove the screws (x2) securing the ADF Rear Cover.
3. Release the hooks (x5) securing the ADF Rear Cover, and remove the ADF
Rear Cover from the ADF Base Assy.
Figure 4-133. Removing the ADF Rear Cover
ADF Rear Cover
C.B.P. 2.5x6, F/Zn-3C (6±1kgfcm)
Hook
Rib
Bottom
 When installing the ADF Right Cover, align the ribs (x3)
shown in
Figure. 4-132, the positioning holes as shown below,
with the dowels (x2), and hooks (x2).
Figure 4-134. Installing the ADF Right Cover
 When installing the ADF Rear Cover, align the hooks (x5) and
the rib (x2) shown in
Figure. 4-133 with the positioning holes
and dowels (x2) as shown below.
Figure 4-135. Installing the ADF Rear Cover
Positioning hole and dowel
ADF Right Cover
Positioning hole and dowel