Epson WorkForce 600 - Page 148

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW Revision A
DISASSEMBLY/ASSEMBLY Disassembling the ADF Unit 149
Confidential
3. Remove the E-Ring.
4. Remove the torsion spring from the ADF PF Roller, and remove the ADF PF
Roller from the ADF Frame Unit in the direction of the arrow.
Figure 4-151. Removing the ADF PF Roller (3)
When installing the ADF PF Roller, attach the leg of the torsion
spring on the ADF PF Roller as shown in
Figure. 4-151.
A D J U S T M E N T
R E Q U I R E D
After replacing the ADF PF Roller, be sure to perform the required
lubrication.
• Chapter 6 “ MAINTENANCE” (p.163)
E-Rung
Torsion spring
ADF PF Roller