3. Select Oce Mode from the Mode list.
4. Make the following settings on the Main Settings tab.
❏ Document Source: Select the document source in which you placed your original.
❏ Size: Select the size of your original.
❏ Image Type: Select the type of image you want to scan.
❏ Resolution: Select the resolution of the image you want to scan.
5.
Click Preview.
e preview window opens.
Note:
If you have place originals in the ADF, the rst page of the originals is ejected when the preview is nished. Place your
rst document page on top of the rest of the pages, and then load the entire original into the ADF.
6. Conrm the preview, and make settings on the Image Adjustment tab as necessary.
Note:
You can adjust the image such as making text enhancements.
7. Click Scan.
8. In the File Save Settings window, make appropriate settings and then click OK.
e scanned image is saved in the specied folder.
User's Guide
Scanning
59
To Next Page
Loading...
Need help?
General
