Epson Workforce WF-2650DWF - Checking the Ink Levels; Checking the Ink Levels - Control Panel; Checking the Ink Levels - Mac os X; Checking the Ink Levels - Windows

Replacing Ink Cartridges
Checking the Ink Levels
You can check the approximate ink levels from the control panel or the computer.
Checking the Ink Levels - Control Panel
1. Enter Setup from the home screen.
2. Select Ink Levels.
Checking the Ink Levels - Windows
1. Access the printer driver window.
2. Click EPSON Status Monitor 3 on the Maintenance tab, and then click Details.
Note:
If EPSON Status Monitor 3 is disabled, click Extended Settings on the Maintenance tab, and then select Enable
EPSON Status Monitor 3.
Related Information
&
“Windows Printer Driver” on page 95
Checking the Ink Levels - Mac OS X
1. Select System Preferences from the menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer.
2. Click Options & Supplies > Utility > Open Printer Utility.
3. Click EPSON Status Monitor.
Ink Cartridge Codes
Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of
non-genuine ink.
e
use of non-genuine ink may cause damage that is not covered by Epson’s warranties, and
under certain circumstances, may cause erratic printer behavior. Information about non-genuine ink levels may
not be displayed.
e following are the codes for genuine Epson ink cartridges.
User's Guide
Replacing Ink Cartridges
77