31 / 106
3 • Safety Features
80113-101_V25087
2023-11
• If a button on the electrode handle has short-circuited due to an error or has been
bypassed at low resistance (e.g. due to moisture in the electrode handle) or was
pressed while the power switch was switched on, this error is indicated acousti-
cally and by an error number after switching on the power switch.
• If a contact of the footswitch has short-circuited due to an error or a pedal is
jammed or a pedal was pressed while the power switch was switched on, the
error is indicated acoustically and by an error number.
To Next Page
Loading...
