ESAB A2 - Active Errors Display; Unit IDs Explanation

9 TOOLS
0460 949 274
- 57 -
© ESAB AB 2015
The following information can be read in the error log:
• The error number of the error
• The day on which the error occurred
• The time at which the error occurred
• The unit in which the error has occurred (see “Unit IDs”, page57)
• The error's error management code (see “Description of fault management codes”,
page58)
9.1.2 Active errors
Main menu → Tools → Event handling → Active errors
The Active errors menu shows only the errors active for the moment.
9.1.3 Unit IDs
Explanation of unit IDs for LAF and TAF power source:
2= Power source
6= Wire feed and travel motion (motor board)
8= Control panel
Note! The unit IDs specified above apply to LAF and TAF power sources, and constitutes an
example of unit IDs for Aristo1000, as the nodes in an Aristo1000 application may have
different ID numbers depending on the configuration of the equipment.