ESI IP Series - Special Keys

IP Series IP Feature Phone operation
A.13
Special keys
FLASH
The FLASH key serves several purposes:
• Getting a fresh dial tone without replacing the handset — When connected to an outside line,
press FLASH to automatically disconnect and receive fresh outside dial tone. (See also
“RELEASE key,” below.)
• Sending a flash hook signal — If operating behind Centrex
4
or a
PBX, press FLASH to transmit a
flash hook signal automatically to either the phone company’s central office or the host PBX.
Either may use this signal to provide you with additional features.
• Toggling between calls — If you hear a call waiting tone while on a call, press FLASH to toggle
between the two calls.
REDIAL
The REDIAL key allows you to automatically call a stored name and number as shown below:
To ... Press REDIAL ...
Redial the last
number called
• When your station is idle
... or ...
• After first lifting the handset
or pressing SPEAKER
Automatically respond
to a message
During message playback with Caller ID
RELEASE
The RELEASE key serves several purposes:
• If pressed when connected to a call through the handset, it disconnects the call and gives you
internal dial tone.
• If pressed when you’re connected to a call via the speakerphone, it disconnects the call.
• If pressed during call waiting, it drops the current call and automatically connects to the
waiting call.
4
A special service your phone company may offer. See your administrator for further details.