EasyManua.ls Logo

ESI IP Series - Password

ESI IP Series
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IP Series Analog stations
B.7
5 Password
The password will apply to station programming, voice mail retrieval and certain other features
(when activated).
1 Enter new password
Your password may consist of 2–8 digits followed by # (0 cannot be the first digit). Entering 0 as the
sole password will turn off the password requirement.
2 Delete current password
3 Hear current password
4 Password security level
Select one of the following password levels.
Selection Result
0 No password required for access from any phone.
1 Password required only for remote access from the outside or
other stations.
2 Password always required.
Off-premises message delivery
The IP Series system can be programmed to deliver messages to an off-premises phone and/or to
page you when your voice mailbox receives a message. You can set the phone number (cell phone,
home number, another extension, etc.) and a pager number. You can further set the system to
deliver only messages marked as urgent (seeUrgent messages, page A.29).
The administrator can also set for your station the:
Number to be called or paged
Delay period before attempting message delivery
Number of attempts
Interval between attempts (in increments of 30 minutes)
"Quiet period” which suspends message delivery for late night, etc.
If you have programmed both an off-premises delivery number and a pager number, the system will
prompt you to choose one of the following delivery options:
Phone-only
Pager-only
Phone, then pager Attempts phone delivery until the maximum number of attempts has
been tried, then follows paging programming.
Phone and page at the same time
No off-premises delivery

Table of Contents

Related product manuals