IP Series Special feature: Guest mailboxes
D.9
3 Pager notification
1 Enter pager number
Enter the pager number followed by # (24 digits maximum
19
). Do not include a CO line
access code (i.e., 9, 8 or 71–76) before the number.
2 Delete pager number
Deletes the currently programmed pager number.
3 Hear current pager number
Plays back the currently programmed pager number.
4 Urgent message activation (see “Urgent messages,” below)
1 Urgent messages only
Only urgent messages will be delivered.
Note: Remember to say in your personal greeting that callers should press 2 to mark a
message as urgent. (For more on personal greetings, see page A.21.)
2 All new messages
Any new message will be delivered.
Urgent messages
You can have all new messages delivered or choose to have only urgent messages delivered.
If you have enabled the urgent message feature as part of user programming (PROG/HELP 6 4),
you must include, in your personal greeting, instructions for the caller to press 2 to mark the
message as urgent. If you have new, urgent messages, your VOICEMAIL key's LED will "flutter”
(blink rapidly) and, when you retrieve your messages, the system will play urgent messages ahead
of other new messages.
9 Message Recycle Bin (un-delete)
The IP Series system stores your most recently deleted 10 messages in a Message Recycle Bin to
allow you to recover, or "un-delete,” messages that may have been deleted in error.
You access the Message Recycle Bin through user programming (PROG/HELP 9). Press 9 to advance
through deleted messages. Press 8 to restore a message to your mailbox as an old message.
19
If pauses or other special dialing characters are required, contact the administrator.
To Next Page
Loading...
