IP Series IP Feature Phone operation
A.33
•
Speed-dial keys
— In addition to programming a programmable feature key with a system
speed-dial number, you can create personal speed-dial keys for automatic dialing of frequently
called outside numbers. If you program 9 (or 8 or 71–76) plus a phone number, the
programmable feature key becomes a speed-dial key. When you program a speed-dial Key,
there's no need to insert a pause after the 9 (or 8 or 71–76). However, if a pause is necessary
later in the dialing string, press the CONF Key to insert a 2-second pause. Additionally, you can
press FLASH to insert a hook-flash or # key to insert a #. The speed-dial number can be up to 24
characters long.
• Other feature keys — If you enter one of the following feature codes, the programmable feature
key will serve as an enable/disable key for that feature. The Installer may have programmed
certain stations for accessing additional features (consult the administrator for your access).
Code(s) Key usage (with reference to page explaining feature)
199
Overhead page (page A.12)
560
Manual day/night/holiday mode (page A.18)
561
Service observing (page A.18)
5XXX
11
ACD agent log on/off (page CC.1)
562
ACD agent wrap (page CC.1)
563XXX
10
ACD administrator (page CC.1)
564
Headset operation (page A.18)
565
Call forward (page A.18)
565YYY
10
Call forward to a specific extension (page A.18)
568
Message monitor key (page )
569
Background announce (page A.19)
571
Personal greeting 1 (page A.19)
572
Personal greeting 2 (page A.19)
573
Personal greeting 3 (page A.19)
574
Missed call key (page A.19)
575 and 576
Virtual answer keys (page A.20)
577
QuickPage (page A.20)
11
XXX = ACD department Number; YYY = extension number.
To Next Page
Loading...
