462 Ion Operations Manual
Clicking {Next} again you will see a drop down menu to select the target export location from any
available write-enabled removable media such as a USB drive.
If you experience software problems with your system that we are unable to reproduce, sending
these log files to ETC Technical Services (see Help from ETC Technical Services (on page11)) can help
us isolate the issue.
Backup Show Archive
{Backup Show Archive...} allows you to either backup the most current version of each show file or
every version of each file to a USB drive.
Restore Show Archive
{Restore Show Archive...} allows you to restore show files from a USB drive.
Backup and Restore System Settings
These settings allow you to backup and restore all of the ECU system settings, including Net3 ser-
vices.
This is useful for sharing settings between consoles, including ETCnomad.
Backup System Settings
{Backup System Settings}will open a window that allows you to save .ini file to a selected drive. To
backup settings, select a drive from the drop down menu, and press {Accept} to save or {Cancel} to
exit without saving.
Restore System Settings
{Restore System Settings}will open a window that allows you to select a saved.ini file. Select the
desired file and press {Ok} to restore settings. Press {Cancel} to close the window without restore set-
tings.
To Next Page
Loading...
