Show Control 487
<Event> [1] [Time] [1] [5] [0] [0] [Enter] - sets the time for 3:00pm.
<Event> [1] {Days} {Mon} {Wed} {Fri} [Enter] - adds on Mondays, Wednesdays, and Fridays.
Note: Days of the week can either be entered in from their softkeys, or you can enter them
in from the keypad using the conventional modifiers (+, -, thru). Monday is 1.
Define the Astronomical Time and Date.
<Event> [2] [Time] {Before Sunset} [3] [0] [Enter] - sets the time for 30 minutes before sunset.
<Event> [2] {Days} [1] [+] [2] [+] [3] [+] [6] [Enter] - adds on Monday, Tuesday, Wednesday,
and Saturday.
Define the Astronomical Time and Date.
<Event> [3] [Time] {After Sunrise} [6] [0] [Enter] - sets the time for an hour after sunrise.
Note: The events will renumber themselves to be in the correct order of execution through-
out the day. Event 3 is now listed as Event 1. The command line will change to Event 1 auto-
matically.
<Event> [1] {Date} [2] [1] {Month} [1] [0] {Year} [2] [0] [1] [5] [Enter] - sets the date to October
21, 2015.
Creating the action for each event is the same as time code. Select the event and specify either cue,
submaster, or macro.
<Event> [1] [Cue] [1][2] [Enter]
Note: As there is no action softkey, pressing [Cue], [Sub], or [Macro] assumes you are post-
ing to the action field.
To Next Page
Loading...
