ETC ION - Page 525

Show Control 523
OSCMethod Arguments Examples/Comments
/eos/subscribe/param/<parameter> 1=subscribe, 0=unsubscribe /eos/subscribe/param/red=1
/eos/subscribe/param/<parameter 1>/<parameter 2>/... 1=subscribe, 0=unsubscribe /eos/subscribe/param/pan/tilt=1
Direct Selects
OSC direct selects are virtual buttons and are mapped separately than direct selects visible on the
console. To use direct selects, you must first send one of the direct select creation commands. Direct
selects are mapped as a single target type.
Note: Eos will send the description and button labels for all OSC direct selects. See Implicit
OSC Output (on page534) for more information.
OSC Method Arguments Examples/Comments
Direct Select Creation
/eos/ds/<index>/<target type>/
<button count>
/eos/ds/1/chan/10 (create OSC direct select bank
#1 with 10 channel
buttons)
/eos/ds/2/group/25 (create OSC direct select
bank #2 with 25 group but- tons)
/eos/ds/<index>/<target type>/
flexi/<button count>
/eos/ds/1/chan/flexi/10 (create OSC direct select
bank #1 with 10 channelbuttons, in flexi mode)
/eos/ds/<index>/<target type>/
<page number>/<button
count>
/eos/ds/1/chan/3/10 (create OSC direct select
bank #1 with 10 channelbuttons on page 3)
Can also be used to quick jump to a specific page
/eos/ds/<index>/<target type>/
flexi/<page number>/<button
count>
/eos/ds/1/chan/flexi/3/10 (create OSC direct select
bank #1 with 10 channelbuttons on page 3, in
flexi mode)
Can also be used to quick jump to a specific page
Direct Select Paging
/eos/ds/<index>/page/<delta> number for page delta
/eos/ds/1/page/1 (page down by 1)
/eos/ds/1/page/-1 (page up by 1)
/eos/ds/1/page/10 (page down by 10)
UsingDirect Selects
/eos/ds/<index>/<button
index>
number for button edge: 1.0=down, 0.0=up
(optional)
/eos/ds/1/1=1.0 (press first button of OSC
direct select bank #1)
/eos/ds/1/1=0.0 (release first button of OSC
direct select bank #1)