70 Ion Operations Manual
From the configuration window, you can select the target type of scene, and the scene number.
Only one scene can be assigned at a time.
From the command line, you can select a scene, such as [Cue] [1] {Attributes} {Scene} [1] [Enter].
Then double click on a direct select to assign the selection.
Selecting Channels with Direct Selects
Channel direct selects are highlighted when selected. Channel selection from the direct selects is an
additive process, if channels 1 through 5 are selected, pressing {Channel 6} adds channel 6 to the
selection, leaving channels 1 through 5 also selected. Pressing {Channel 6} again will deselect the
channel.
If you have labeled channels in patch, those labels will be displayed above the channel number when
viewing channels in the direct selects.
{Channel 1} - adds channel 1 to currently selected channels, if not currently selected.
{Channel 1} {Channel 10} - adds channels 1 and 10 to currently selected channels.
{Page q} - pages direct selects down by one page.
{Page p}- pages direct selects up by one page.
Direct Selects in Flexi Mode
Direct selects can be placed into a flexi mode, which will remove empty tiles. {UseFlexi} needs to be
enabled in the Direct Selects configuration menu. See Direct Selects Configuration Menu (on
page66).
When enabled, the {Flexi} button will display in the direct selects display.
To Next Page
Loading...
