Eventide H9000 - Session; FX Chain

1.3.1. Session
A Session is the highest level on the H9000 hierarchy. Session presets save the entire state of the
product at any given moment, including:
The currently loaded FX chains:
Parameters within the FX chains.
Routing assignments within the FX chains.
Routing information external to each FX chain, including:
Physical I/O of each FX chain container.
Direct I/O connections made between physical I/O.
Additional input/output gain settings for each I/O channel routed to/from the FX chain.
The current state of the global settings:
All the settings found in the Setup mode (these can be excluded by category when loading).
All the Scene Maps found in Scenes mode, along with current active map index.
LED meter mappings.
The state of Global Mute/Bypass.
Metadata (Name and ID are the most relevant to the user).
1.3.2. FX Chain
The H9000 allows you to chain up to four algorithms together into a custom FX Chain. The FX chain is
fed by audio inputs, then the audio is routed through up to four algorithms, and then nally to audio
outputs.
You are free to decide which algorithms are included in the FX chain, the order they process the
audio in, and even determine aspects such as separate parallel and series audio paths.
.
◦
◦
.
◦
◦
◦
.
◦
◦
◦
◦
◦
1. Introduction
13
Copyright © 2021, Eventide Inc.