Highlighting the Edit button in the center portion of an FX chain block, then pressing the Enter
button.
The screen will switch to the Algorithms display and the front panel Algorithms button will illuminate.
4.5.1. Algorithms Overview
The Algorithms overview screen displays the specic algorithms that make up the currently
highlighted FX chain. The display shows the dierent algorithms present, their routing within the FX
chain, and the audio inputs/outputs that feed the FX chain.
Rotate the wheel to navigate to the dierent objects in the FX chain, which include:
Algorithm processing blocks
Input and Output blocks
When viewing the Algorithms screen, pressing the Enter button works contextually for whatever
specic object you have highlighted:
Algorithm: When the Edit label is highlighted, pressing Enter takes you to the Parameters view
page (see the Parameters section for more details) When the Replace label is highlighted,
pressing Enter takes you to the main list of algorithms to choose from
I/O Label: Pressing Enter takes you to the editor screen for the audio inputs/outputs
4.5.2. Conguring Audio I/O For an Algorithm
To congure the audio I/O on the Algorithms view screen:
Use the cursor keys to highlight the audio input or output block you wish to congure, and press
the Enter key.
You can then use the cursor keys to highlight the audio I/O category (Analog, Digital, USB,
Expansion Card), then cursor over to the channel number and adjust it separately. This type of
ne-tuned I/O control is particularly important when an expansion card is present, which can
have 32 I/O channels per slot.
Use the wheel to cycle through the available input or output assignments.
•
•
•
•
•
•
•
•
4. Front Panel Operation
Copyright © 2021, Eventide Inc.
To Next Page
Loading...
