4.9. Scenes
Long press the front panel Tap/Scenes button to bring up the SCENES screen.
Scenes are used to control sequenced program changes in the H9000. This mode can be useful when
you are using the H9000 in a live environment such as a concert or theatrical production, and wish to
“step through” dierent pre-congured states in an order you have set up in advance.
For example, the main vocalist in a concert may need dierent reverb parameters at dierent times
during the show; scenes provide a quick, simple way to achieve this:
You can create multiple “Scene Maps” and select one at any given time
A Scene Map is a collection of Scenes, along with the Trigger Sources
Each Scene Map can contain a total of 128 Scenes
A Scene itself can be thought of as a particular state of the FX chains, running under a current
session
The “Scene” denotes a set of actions to be triggered that put the H9000 into that particular
state, either an:
FX chain or algorithm preset to be loaded into a destination container
A mute/bypass/enable action to be applied to a destination container
4.9.1. Trigger Source Options
A “Trigger Source” allows assignment of actions, such as loading a Scene by number, or incrementing/
decrementing through Scenes to a MIDI controller
You can control Scene changes from the front panel, using Emote, or an external control source such
as a MIDI controller or Aux Switch
Scenes can be triggered in the following ways:
•
•
•
•
•
◦
◦
4. Front Panel Operation
Copyright © 2021, Eventide Inc.
To Next Page
Loading...
