4.9.1.1. Load By Number
Load By Number works like a traditional program change message: it will load whatever Scene
matches the number of the program change message you send, between 1 and 128. Although it
usually makes sense to use actual MIDI Program Changes, you can also use Note On or Continuous
Controller triggers.
4.9.1.2. Increment/Decrement
Increment/Decrement switches to the next or previous scene, but keeps it in a pending state. When
a scene is in a pending state, a yellow circle will appear to the right of its text.
4.9.1.3. Load Current
Loads a scene from its pending state ater being selected with the above mentioned “Increment/
Decrement” function. When a scene is loaded from a pending state, the yellow circle to the right of
the text will become green, indicating the scene has been loaded.
4.9.1.4. Increment & Load/Decrement & Load
Switches to the next or previous scene and then loads it immediately
Note
If your scenes are sequenced in the order to be used, it’s probably easier to use the Increment &
Load/ Decrement & Load options. However, if you need to jump around or skip Scenes, you can
use Increment/Decrement with the Load Current option.
4. Front Panel Operation
Copyright © 2021, Eventide Inc.
To Next Page
Loading...
