Eventide H9000 - Saving and Importing Data

USB In 9-16
Digital Audio Connector Out 1-8 (AES DB25)
Analog Out 1-8
USB Out 1-8
USB Out 9-16
Use the cursor up/down buttons or wheel to navigate among the eight pages of metering views.
 Note
While in the I/O Meters page, you can use the navigation keys to select a meter. If a Physical
Input or Output is routed to or from an FX chain, highlight the meter to see which FX chain it is
routed to or from. This is indicated by a purple square under the meter and the corresponding
label bar at the bottom of the page.
4.8. Saving and Importing Data
The H9000 allows you to save various types of data, both to its internal memory or a USB drive
connected to any of the USB ports.
Once you have saved this data to an attached USB drive, you can import it to a dierent H9000,
allowing you to easily share your work among machines.
 Note
The USB drive must be formatted in FAT32 format. Recent versions of Windows and macOS do not
oer FAT32 formatting as part of their built-in disk utilities, so depending on the version of
Windows or macOS your computer is running, you may need to format the drive with a 3rd party
utility.
.
.
.
.
.
4. Front Panel Operation
89
Copyright © 2021, Eventide Inc.