Eventide H9000 - 4.4. FX Chains

4.3.2. New
Press the New sot key to create a new session. If you have made changes to the currently loaded
session, you will be prompted to save your changes rst. You will then see the Create New Session
screen. Press the Create New Session sot key (or the Cancel sot key if you change your mind). The
new session you have created will be titled “Default Session” and will contain a default FX chain.
4.3.3. Copy
Press the Copy sot key to make a copy of the currently highlighted session. The naming screen will
appear, allowing you to create a new name for the copy of the session. This is similar to the “Save As”
function on a word processor application, where you can save a copy under a dierent name.
4.3.4. Delete
Press the Delete sot key to delete the currently highlighted session in the list. You will be prompted
with a conrmation screen; press either the Cancel or OK sot keys.
Note that you cannot delete factory sessions. These sessions are meant to always be available on
the H9000 and never be removed.
4.3.5. Rename
Press the Rename sot key to rename a currently highlighted session. You will then be presented with
the naming screen where you can enter a new name.
Note that you cannot rename factory sessions. If you attempt to do so, you will be oered the option
of creating a new user session, which you can then rename.
4.3.6. Load
Press the Load sot key to load the currently highlighted session. This sot key duplicates the
function of pressing the Enter key when a session is highlighted.
56
4. Front Panel Operation
Copyright © 2021, Eventide Inc.