Eventide H9000 - Editing Parameters in an Algorithm

4.6.1. Editing Parameters in an Algorithm
To adjust a specic parameter:
Use the cursor up/down keys to navigate to a parameter category. The right-hand side of the
screen will display the parameters within that category.
Use the cursor keys to highlight the parameter you wish to adjust.
Use the Enter key and/or wheel to adjust the parameter you have highlighted.
 Note
You can also use the two middle-let sot keys to page up/down among the parameter
categories, or the two outer-let sot keys to page up/down through the algorithms, while
highlighting parameters within the parameter view. This can be a faster way to work than using
the cursor keys exclusively; you can jump around the screen quickly and don’t need to
constantly “cursor let” back to the parameter category list.
The parameters screen contains four additional sot keys:
Quick Map
Custom Map
Random
Functions
•
•
•
•
•
•
•
4. Front Panel Operation
77
Copyright © 2021, Eventide Inc.