Mute/Bypass
Gain/Levels
4.4.3.1. Add
Press the Add FX Chain sot key to add a new FX chain to the currently loaded session. You can have
up to four FX chains in your H9000. The H9000 will prompt you to select a name and I/O conguration
for the FX chain, which will be routed automatically upon creation.
4.4.3.2. Delete
Press the Delete sot key to delete the highlighted FX chain. Note that you cannot delete the FX
chain if it is currently the only one loaded in the session.
4.4.3.3. Rename
Press the Rename sot key to bring up the naming screen, where you can rename the currently
highlighted FX chain container in the session.
Note
The name of the FX chain container is distinct from the name of the FX chain preset loaded into
it; this can be useful for distinguishing an FX chain’s purpose (e.g. Guitar 1, Guitar 2) if the same
preset is loaded into multiple containers.
4.4.3.4. Direct I/O
Press the Direct I/O latching sot key to create a “Direct I/O” signal chain. This is not an FX chain, but
rather a direct audio pathway between a physical audio input and output.
Direct I/O allows you to take advantage of your H9000 as a network-attached I/O box, making the
H9000’s pristine analog converters available for highest quality analog I/O. Even at times when you
•
•
4. Front Panel Operation
Copyright © 2021, Eventide Inc.
To Next Page
Loading...
