To Next PageTo Next Page
Need help?Do you have a question about the evertz CP-2232E and is the answer not in the manual?
Details the ports and connectors on the rear panel, including serial, Ethernet, USB, and 12VDC inputs.
Describes the two LCD touch-screen displays and navigation buttons on the front panel for operation.
Explains how to connect the auto-ranging DC voltage adapter and power supply cord for the unit.
Details the rack mounting specifications, fitting into a standard 19-inch rack space, and passive cooling.
Outlines the control, electrical, physical dimensions, weight, and operating temperature of the CP-2232E.
Provides guidance for qualified service personnel regarding maintenance and servicing of the unit.
Explains the three methods for navigating menus: touch-screen tabs, touch-screen arrows, and soft-key buttons.
Details the procedure for manually updating the CP-2232E firmware using a USB memory key.
Guides the user on setting IP addresses and bonding for network ports A and B via the Network screen.
Outlines tests for LCD touch-screens, soft-key buttons, and GPIO, covering Key, LCD, Touchscreen, and GPIO tests.
Explains how to check power status, BIOS release date, uptime, and workload via the Status screen.
Details requirements and steps for upgrading firmware via the web interface, including browser and file acquisition.
Covers managing products, service templates, services, and systems through the web interface.
Enables setting discovery settings and configuring communication with the VistaLINK® Alarm Server.
Allows creation of source-service, destination-service, and macro-service mapping for routing.
Provides access to panel/product information, logs, preferences, and configuration import/export.
Enables the user to upgrade the firmware on the CP-2232E panel via the Upgrade menu.
Guides on setting up and performing daily operation for controlling an MVP system from the CP-2232E.
Guides on setting up SNMP services for controlling terminal equipment parameters from the CP-2232E.
Details the process of adding an EQX Server for router management through the CP-2232E's web config tool.
Explains how to map SNMP services to routing devices and source ports for accessing terminal gear parameters.
Explains how to use the SRC button to display available sources, select them, and route them to destinations.
Details how to use the DST button to display and select available destinations, and view current/next sources.
Describes how to navigate through destination pages and select dynamic destinations using the Up/Down arrow buttons.
Explains how to clear pending or preset sources for a selected destination, removing them from the 'Next Source' field.
Describes how to enable/disable and display specific audio or video levels for a destination to perform a Breakaway route.
Details the various functions accessible via the "MORE" button, including Profile, Info, Tielines, Toggle, Lock, Protect, One DST View, and Salvo.
Details the ports and connectors on the rear panel, including serial, Ethernet, USB, and 12VDC inputs.
Describes the two LCD touch-screen displays and navigation buttons on the front panel for operation.
Explains how to connect the auto-ranging DC voltage adapter and power supply cord for the unit.
Details the rack mounting specifications, fitting into a standard 19-inch rack space, and passive cooling.
Outlines the control, electrical, physical dimensions, weight, and operating temperature of the CP-2232E.
Provides guidance for qualified service personnel regarding maintenance and servicing of the unit.
Explains the three methods for navigating menus: touch-screen tabs, touch-screen arrows, and soft-key buttons.
Details the procedure for manually updating the CP-2232E firmware using a USB memory key.
Guides the user on setting IP addresses and bonding for network ports A and B via the Network screen.
Outlines tests for LCD touch-screens, soft-key buttons, and GPIO, covering Key, LCD, Touchscreen, and GPIO tests.
Explains how to check power status, BIOS release date, uptime, and workload via the Status screen.
Details requirements and steps for upgrading firmware via the web interface, including browser and file acquisition.
Covers managing products, service templates, services, and systems through the web interface.
Enables setting discovery settings and configuring communication with the VistaLINK® Alarm Server.
Allows creation of source-service, destination-service, and macro-service mapping for routing.
Provides access to panel/product information, logs, preferences, and configuration import/export.
Enables the user to upgrade the firmware on the CP-2232E panel via the Upgrade menu.
Guides on setting up and performing daily operation for controlling an MVP system from the CP-2232E.
Guides on setting up SNMP services for controlling terminal equipment parameters from the CP-2232E.
Details the process of adding an EQX Server for router management through the CP-2232E's web config tool.
Explains how to map SNMP services to routing devices and source ports for accessing terminal gear parameters.
Explains how to use the SRC button to display available sources, select them, and route them to destinations.
Details how to use the DST button to display and select available destinations, and view current/next sources.
Describes how to navigate through destination pages and select dynamic destinations using the Up/Down arrow buttons.
Explains how to clear pending or preset sources for a selected destination, removing them from the 'Next Source' field.
Describes how to enable/disable and display specific audio or video levels for a destination to perform a Breakaway route.
Details the various functions accessible via the "MORE" button, including Profile, Info, Tielines, Toggle, Lock, Protect, One DST View, and Salvo.
General| Type | Control Panel |
|---|---|
| Number of Buttons | 32 |
| Display | LCD |
| Connectivity | Ethernet |
| Power Supply | External |
| Input Voltage | 12VDC |
| Power Consumption | 10W |
| Humidity | non-condensing |
| Storage Temperature | -20°C to 60°C |
| Dimensions | 19" x 1.75" x 3" (482.6mm x 44.45mm x 76.2mm) |
