CP-2232E
Remote Control Panel
Revision 1.1 Page 15
• Delete Selected Parameters/Groups: Select the Delete Selected Parameters/Groups to
delete a parameter/group.
•
Add a Group: To add a group to the list, select the Add a Group button.
•
Hide Tree View: Selecting the Hide Tree View button will hide the parameter tree view.
Selecting this button again will show the parameter tree view.
•
Show Details: Selecting the Show Details button will toggle the content of the
Parameter field. When the user selects the Show Details button, the path of the
parameter and the abbreviated name will be displayed in the Parameter field (i.e.
VideoControl > Video Control > H Phase Offset (HPhaseOffset). If the user wishes
to only display the Parameter name, then press the same button again (now
identified as Hide Details).
• Save: Press the Save button to save all the changes you have made.
5.2.2.2. Service Template Parameter Tree
The Service Template Parameter Tree is used to select parameters and add them to the template.
The user can navigate through the parameter tree by pressing the plus (+) and minus (-) buttons to
expand or collapse the parameter items. Once the user has located their desired parameter, they can
transfer it to the list by dragging the parameter from the tree and dropping it onto the list.
To quickly locate a parameter, type the parameter name into the Search Parameter Tree… field and
press the <enter> key on your keyboard or select the
icon. The search tool will expand the
parameter tree to reveal the location of the parameter you entered.
To Next Page
Loading...
