CP-2232E
Remote Control Panel
Page 26 Revision 1.1
5.3.3. Import Device Labels
This page enables the user to import device labels in the Navigation Tree from VistaLINK
®
.
Figure 5-19: Import Device Labels Page
To import a device label, follow the instructions outlined below:
1. Select the Browse button and navigate to the appropriate .csv file and then select the Open
button.
2. Once the file name is displayed in the field next to the Browse button, select the Install button.
The panel must be restarted when a file is imported. Click the Restart Panel Software button in the
top right hand corner.
To Next Page
Loading...
