Testing Fibers
94 OX1
Performing Measurements
6. If you intend to perform a standard test, select a test function (see Test
Functions and Tools on page 10 for details).
OR
If you intend to perform a test with the PON tool, tap the button
corresponding to the test you want to perform (see Working With the
PON Tool on page 72 for details).
To test toward the ONT
(with or without ONT
detection)
To start an acquisition with the
ONT detection test
To start an acquisition with the
splitter detection test
To test toward the splitter
(with or without splitter
detection)
To Next Page
Loading...