BlackDiamond 8800 Series Switches Hardware Installation Guide
163
CHAPTER
13
Repacking a BlackDiamond
8800 Series Chassis
This chapter includes the following sections:
● Safety Information on page 163
● Repacking the BlackDiamond 8810 Chassis on page 164
● Repacking the BlackDiamond 8806 Chassis on page 167
The chapter describes how to remove a BlackDiamond 8800 series chassis from an equipment rack and
repack the chassis for shipping back to Extreme Networks. To repack a BlackDiamond 8800 series
chassis, use the original shipping crate or box and packing materials.
Read the information in this chapter thoroughly before you attempt to remove a BlackDiamond 8800 series
chassis.
Safety Information
Before you begin to repack the BlackDiamond 8800 series switch, read the safety information in
Appendix A.
Correct lifting procedures for a BlackDiamond 8800 series chassis require two or more people.
Before you lift a BlackDiamond 8800 series chassis, make sure the chassis is empty to prevent unnecessary
weight. This will also prevent damage to the system components due to possible chassis flex when it is being lifted.
To Next Page
Loading...
