Extreme Networks BlackDiamond 8810 - 10 G4 Xa I;O Module

BlackDiamond 8000 Series Modules
BlackDiamond 8800 Series Switches Hardware Installation Guide
36
10G4Xa I/O Module
The 10G4Xa I/O module (Figure 18) has four XFP-based 10-gigabit Ethernet ports.
Figure 18: 10G4Xa I/O Module
In the default configuration of the 10G4Xa I/O module, all ports:
● Are added to the default VLAN as untagged
● Inherit the properties of the default VLAN (for example, protocol type and VLANid)
The 10G4Xa I/O module has the following LEDs:
● Module status
● Module diagnostics
● Port status
For information about the LEDs and their activity on the 10G4Xa I/O module, see “I/O Module LEDs”
on page 50. For information about the XFP interfaces, see the Extreme Networks Pluggable Interface
Modules Installation Guide.
10G4Xa10 G4X a
10GBASE-X XFP
41612
Module status LEDs 10 Gbs ports
BD_155