Extreme Networks BlackDiamond 8810 - G48 Ta I;O Module

BlackDiamond 8000 Series Modules
BlackDiamond 8800 Series Switches Hardware Installation Guide
34
G48Ta I/O Module
The G48Ta I/O module (Figure 16) has 48 autosensing 10/100/1000BASE-T ports that use standard
RJ-45 connectors.
Figure 16: G48Ta I/O Module
In the default configuration of the G48Ta I/O module, all ports:
● Are added to the default VLAN as untagged
● Inherit the properties of the default VLAN (for example, protocol type and VLANid)
● Operate in autonegotiation mode
The G48Ta I/O module has the following LEDs:
● Module status
● Module diagnostics
● Port status
For information about the LEDs and their activity on the G48Ta I/O module, see “I/O Module LEDs”
on page 50.
Module status LEDs
ASP048
10/100/1000BASE-T
ports