Extreme Networks BlackDiamond 8810 - Unpacking the BlackDiamond 8806 Chassis

Installing the BlackDiamond 8800 Series Chassis
BlackDiamond 8800 Series Switches Hardware Installation Guide
84
Unpacking the BlackDiamond 8806 Chassis
CAUTION
The BlackDiamond 8806 chassis weighs almost 65 pounds. Proper lifting and moving of the chassis
requires two people.
To unpack the BlackDiamond 8806 chassis:
1 Open the top flaps and remove the accessories from the shipping carton (Figure 44). Lift out the
packing foam.
Figure 44: Removing Accessories from the BlackDiamond 8806 Chassis Shipping Carton
2 On each side of the shipping carton, remove the clip lock at the bottom (Figure 45).
a Using your thumb and index finger, squeeze the prongs together to release the clip lock.
b Pull the clip lock outward from the carton.
Repeat these steps to release each remaining clip lock.
Figure 45: Clip Locks on the BlackDiamond 8806 Chassis Shipping Carton
BD_297