BlackDiamond 8800 Series Switches Hardware Installation Guide
85
3 Slide the shipping carton up over the BlackDiamond 8806 chassis (Figure 46). Remove the inside
corner braces.
Figure 46: Removing the Carton from the BlackDiamond 8806 Chassis
4 Unwrap the chassis.
5 At each side of the chassis, place one hand in an empty power supply bay and the other hand in the
recessed hand-hold on the back panel of the chassis. (Figure 47).
Figure 47: Gripping Points on the BlackDiamond 8806 Chassis
To Next Page
Loading...
